Husqvarna m1896 Mauser Sporter 9.3 x 5.7mm 5+1 Internal hinge plate mag. Some ammo is available. 23 5/8" barrel length. BLADE FRONT SIGHT WITH RAMP. U NOTCH REAR SIGHT. RECEIVER IS DRILLED AND TAPPED WITH WEAVER TYPE BASES. ONE PIECE WOOD STOCK. CHECKERED PISTOL GRIP. BLACK VENTED RUBBER RECOIL PAD. SLING SWIVELS. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:GunsSporting Goods

30370 impressions

1290 views

Swedish Mauser 1896 Sporter LEFT Handed stock, but right handed receiver in Swedish 6.5x55mm Tapered Bull Barrel Manufactured by Carl Gustaf 1911. Receiver is tapped for scope base mounts on the top. 5+1 internal mag with hinge plate. 1896 CUSTOM SPORTER LEFT HAND, CALIBER: 6.5 X 55, BLADE FRONT SIGHT WITH RAMP, U NOTCHED REAR SIGHT, BLUED FINISH, RECEIVER DRILLED AND TAPPED FOR SCOPE MOUNT, SILVER BOLT WITH LARGE BLACK POLYMER BOLT KNOB, SAFETY ON RIGHT SIDE BEHIND RECEIVER. ONE PIECE WOOD STOCK, GROOVED FOREARM, PISTOL GRIP, LEFT HAND, CHEEK REST AND PALM SWELL, BLACK VENTED RUBBER RECOIL PAD, GRIP CAP, SLING SWIVELS. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:GunsSporting Goods

37619 impressions

1940 views

Husqvarna m1896 Mauser Sporter 9.3 x 5.7mm 5+1 Internal hinge plate mag. Some ammo is available for an additional cost. BLADE FRONT SIGHT WITH RAMP. U NOTCH REAR SIGHT. RECEIVER IS DRILLED AND TAPPED FOR SCOPE BASES. ONE PIECE WOOD STOCK. CHECKERED PISTOL GRIP. BLACK VENTED RUBBER RECOIL PAD. SLING SWIVELS. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:GunsSporting Goods

31882 impressions

1433 views

I have an excellent condition antique French percussion pistol from the time of King Louis-Phillippe circa 1830s for sale. This firearm requires no license to own or shoot due to its age. I bought this gun from a Quebec antique arms dealer a few months ago and unfortunately need to move it on due to house renovations. This gun had its lock repaired by Bernard Riendeau, a Quebec master gunsmith specialising in antique arms. It is fully functional. This gun is in excellent condition, excellent bore, all engraving and wood intact. There are some small dents here and there on the stock, and minor wood loss around the front stock pin. There is some pitting around the nipple area as seen in pics. This gun had been test fired by Bernard, but I haven't had time to try it. Because the lock was rebuilt it is quite stiff. Half and full lock are, of course present. The engraving on the top of the receiver says Patent Rohre, with serial number 6923 engraved on the bottom of the grip. It will come shipped with the letter of authenticity as well as a silicone gun sock. I am looking for $1750 shipped by Canada Post. Selling under retail price for a quicker sale. Cash or EMT only. NO TRADES PLEASE. Insurance is extra and on the buyer.

categories:GunsSporting Goods

1459 impressions

82 views

Unfired, BNIB Henry Big Boy Brass (H006G) – chambered in .44 Magnum/.44 Special and rockin’ a 10+1‑round tube capacity. This polished‑brass receiver lever gun features a 20″ octagonal blued steel barrel, American walnut straight‑grip stock, and side‑loading gate for fast reloads. Sights are a fully adjustable semi‑buckhorn rear with diamond insert and a brass bead up front. It’s also drilled and tapped for easy optic mounting. Weighing 8.68 lbs, it’s the ideal blend of classic styling and modern usability. PAL required for the transfer and will be validated. No trades please and price is firm.

categories:GunsSporting Goods

34619 impressions

1620 views

**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have a brand new Sako 85 Finnlight II Rifle, 30-06 SPRG, in a Cerakote Tungsten treated stainless steel action with an elastomer grip/black composite stock. It’s got a 22.4” fluted barrel, adjustable trigger (2-4lbs), 5rd magazine, and adjustable cheekpiece. SAKO Model #SBW3114A1930B4 I am the first owner of this brand new rifle but have not fired the rifle. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. First Paid, First Served.
 Holds only with deposit. Delivery Negotiable.
 Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION Building on the famous Finnlight name, the Sako 85 Finnlight II is an icon reborn. The lightweight RTM fiberglass stock makes the rifle light to carry and the barrel has been treated with a weather resistant Cerakote® coating, which makes this rifle the perfect choice for all conditions. The fully adjustable cheek piece also makes the rifle perfectly customizable for your preferences. SPECIAL FEATURES * HIGH QUALITY RTM FIBERGLASS STOCK 
The composite stock is manufactured with aerospace grade RTM technology. All Finnlight II stocks have carbon fiber bedding to ensure maximum accuracy and stability in all temperatures.
 * BARRELED ACTION 
Cerakote® treated stainless steel action for maximum weather resistance.
 * SECURE GRIP 
The grip surfaces and the cheek piece are made from robust elastomer.
 * ADJUSTABLE CHEEK PIECE 
Maximum precision and unique comfort for each shot. STANDARD FEATURES * ACTION 
Sako 85 actions come in six different sizes (CSA), providing reliable functioning for each caliber. All Sako 85 models feature controlled cartridge feed (RCS) to eliminate double feed or cartridge jams. The turn-bolt handle places the hand in a natural position during bolt operation, which allows for rapid repeated firing.
 * BARREL 
Sako 85 barrels are manufactured with a passion for craftsmanship and the very best knowledge of Sako. Barrel blanks are drilled, honed, cold- hammer forged, finished and finally individually inspected by an optical fine-tuning instrument: the human eye. Twist rates are chosen for each caliber to optimize accuracy and bullet performance. Sako 85 barrels, blued or stainless, have a non-reflecting, satin-like surface – with the exception of the Sako 85 Deluxe and Safari models that have a highly polished finish.
 * MAGAZINE 
The staggered, two-row magazine of the Sako 85 is made of stainless steel. The detachable magazine can also be loaded through the ejection port. The Total Control Latch (patent pending) of the Sako 85 prevents accidental magazine release.
 * SAFETY 
The special two-way Sako safety locks both the trigger and the bolt handle. The unique bolt release button of the Sako Safety System allows you to load or remove a cartridge from the chamber while the safety is engaged.
 * SIGHTS 
Most of the Sako 85 models with a blued finish on the barrel are available with either standard or optional adjustable iron sights. The front bead is adjustable in elevation and the rear blade in windage.
 * STOCK 
The ergonomics of Sako 85’s walnut and synthetic stocks are built for an optimal shooting posture. The excellent balance and smooth bolt operation of Sako 85 rifles enable fast, straight and accurate operation.
 * TRIGGER 
The weight of pull of the single- stage Sako 85 trigger unit is adjustable from 1 to 2 kg (2–4 lbs). An optional single-set trigger is available for most Sako 85 models. All Sako 85 rifles have an extremely durable, all-steel trigger guard that protects the trigger. An exception to this are the Finnlight and Carbonlight models, which have a lightweight hard-anodized aluminium trigger guard. SPECIFICATIONS MPN - SBW3114A1930B4 Caliber - 30-06 Sprg Receiver Size - M Handedness - Right Weight - 2.8 kg / 6.17 lbs Total Length - 1090 mm / 42.9 in Barrel Length - 570 mm / 22.4 in Rate of Twist - 1:11" Magazine - Detachable Magazine Capacity - 5 + 1 Trigger - Single Stage Trigger Stock Material - Composite Stock Finish - Black Material - Cerakote Tungsten Muzzle Thread - No Cheek Piece - Adjustable Open Sights - No

categories:GunsSporting Goods

26211 impressions

823 views

**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have for sale a new Savage Mark II FVT bolt action 22LR, the 21” heavy carbon steel barrel is button rifled and weighs 6lbs. It has a Peep Sight with changeable front sight inserts (see pic), user adjustable accutrigger, and a 5rd detachable magazine. I am the first owner of this new rifle but have not fired the rifle. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** First Paid, First Served.
 Holds only with deposit. Delivery Negotiable. 
 Buyer pays for shipping costs and makes arrangements for payment. MANUFACTURER DESCRIPTION Raising the bar in 22 LR performance, the Savage Arms Mark II FVT offers user-adjustable AccuTrigger technology for crisp, customized trigger pulls. The 21-inch, heavy carbon steel barrel is button rifled and paired with a rugged, matte black synthetic stock. Weighing 6 pounds, the rifle has a 5-round detachable box magazine and peep sights. FEATURES * Button-rifled, 21-inch heavy carbon steel barrel * Rugged, black matte synthetic stock; peep sights * 22 LR chambering; 5-round detachable box magazine SPECIFICATIONS SKU - 28800 Purpose - Small Game, Target Shooting Barrel Contour - Varmint Barrel Finish - Matte Barrel Length - 21" (53.34 cm) Barrel Material - Carbon Steel Rate of Twist - 1:16" Barrel Threaded - No Pistol Grip - No Interchangeable Grip Panel - No Magazine Capacity - 5 Magazine Release - Ambidextrous Receiver Material - Carbon Steel Feed Type - Detachable Box Magazine Sights - Front Metal Sights - Rear Metal AccuStock - No Stock Pull Length - Min. 13.9" (35.31 cm) Stock Pull Length - Max. 13.9" (35.31 cm) Stock Material - Synthetic Stock Type - Varmint AccuTrigger - Yes Trigger Adjustable - Yes Trigger Pull Force - Min. 2.5 lbs (40 ounces) Trigger Pull Force - Max. 6 lbs (96 ounces) Length - 39.75" (100.97 cm) Weight - 6.12 lbs (2.78 kg)

categories:GunsSporting Goods

12936 impressions

358 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:GunsSporting Goods

12517 impressions

417 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

12332 impressions

433 views

Selling a brand-new, unfired Tactical Sauer SL5 3-G semi-automatic shotgun, chambered in 12 gauge with a 3" chamber and an 18.5" chrome-lined barrel with a stepped rib and a durable black anodized receiver. It has a red fiber-optic front and a ghost ring rear sight for rapid target acquisition and a Picatinny rail. It comes with a black synthetic pistol grip stock with sling attachments, and the extended bolt handle and release button. The inertia-driven system ensures reliable cycling, and the shotgun comes with one flush cylinder choke and one Modified extended choke (Benelli Crio Plus). Not interested in trades, and the price is firm. A valid PAL is required and must be validated to get a transfer number.

categories:GunsSporting Goods

60765 impressions

2481 views

This HENRY PUMP ACTION MODEL H003T RIFLE in .22 S/L/LR Cal. is in approx. 98% condition. ..22 S/L/LR cal., 20 in. blued octagon barrel, 12 (.22 WMR), 16 (.22 L or LR), or 21 (S) shot mag., blue grooved receiver, adj. semi-buckhorn w/diamond insert rear and brass beaded front sights, walnut straight grip stock and forearm, 6 lbs. New 1999. Serial No. P487xxT. Bore is bright, Shiny, and has great rifling. Comes with a black soft case....

categories:GunsSporting Goods

6594 impressions

418 views

JP Sauer SL5 (Breda Italy) excellent condition 1500$ (price include shipping). This semi-automatic Turkey shotgun by J.P. SAUER & SOHN is everything you have been looking for in a turkey shotgun – short, lightweight and accurate. The shotgun is on an inertia driven system and available in 12 Gauge 3” with an 18.5” Stepped Rib, Chrome lined barrel. The stock is dipped in Mossy Oak Obsession Camo and paired with a Pistol Grip Stock with sling attachments and a Picatinny Rail. • 18.5 ” Stepped Rib, Chrome Lined Barrel • Black Anodized Receiver • Inertia Driven System • Extended Bolt Handle and Release Button • Picatinny Rail • LPA Front Bead Sight • Pistol Grip Stock with Sling Attachments • 1 Flush Choke CYL Plus 1 Extended Choke (Benelli CRIO PLUS) • 1 Carlson Turkey choke and 1 flush-fit culindre choke. valid PAL (will be verified).  Check my other ads. (troy .308 / SRV2 5.56 / winchester defender 1300 / R4 / FD12 / Sauer SL5 / Mauler MK91 / SPM12 / KS7 )

categories:GunsSporting Goods

42371 impressions

1445 views

Brand new Non restricted Revolver action Caliber: .22LR Capacity: 6 Barrel Length: 16 Inch Front Sight: Fixed Rear Sight: Adjustable Buckhorn Grip: Shoulder Stock Trigger: Standard Finish: Black Oxide Full Length: 32" Weight: 65.92 oz

categories:GunsSporting Goods

1600 impressions

160 views

This is a correct WW Suhler Consortium M98 rifle. It is my opinion this rifle was reworked by the German military for use in WWII given the original WWII German armorers replacement. It is in original condition with all parts visible numbers matching. No import mark is present. Triggergaurd is unnumnered however it shows an Imperial H woth crown on the magazine floorplate. The magazine follower is an original German armorer Wafdenampt stamped replacement part. Buttplate is correctly unnumbered. Rating Definition: Excellent. Rifle retains 90-95 % crisp original finish. Stock: The walnut stock is correct and serialized 4473 to the rifle in good condition with a crack on the front left side between the upper barrel band and rear barrel band. Note: Stock pictures in listing show what looks like a crack in the mid area of the buttstock however there is no evidence of this on either the pistol grip side of the buttplate side where the stock is cracked whatsoever. Additional pics can be taken to show this. I hypothesize that this is perhaps a shrinkage in the wood due to rifles age. Rifle shows typical handling marks. No evidence of sanding. Bore: Bore is good with very pronounced lands and grooves visible. Rifle shows a great crown and has a smooth chamber. Mechanically sound, the rifle is in excellent condition. The action functions as it should.

categories:GunsSporting Goods

1826 impressions

285 views

Brand New Non Restricted Caliber: .45-70 Govt Capacity 5+1 Barrel:16.5” barrel with 1:20” RH twist 8 groove. 11/16 x 24 threaded barrel with thread protector. Aluminum M-LOK® handguard w/15 M-LOK slots. Forged 416 stainless steel receiver with Armornite® finish. Flat trigger with crisp break. Large Lever loop. Black synthetic stock with textured grip panels. XS Sights® adjustable rear ghost ring sight. HIVIZ® H3 front sight. Part #: 14453 Made in USA

categories:GunsSporting Goods

5396 impressions

313 views

**NEVER FIRED** 12ga x 3" Semi Automatic 18.6" BARREL 5+1 FEATURES 18.6” Chrome Lined barrel Ghost ring rear sight, Picatinny Top Rail Fibre Optic Front Sight Synthetic fixed and 4 position adjustable buttstock with pistol grip 3 Mobil Chokes included (F, M, C) UPGRADES RxArms titanium charging handle RxArms bolt release tab Tactical Nylon 5 Round Shell Holder Includes... Manual, chokes, 2 stocks, oil, factory charging handle

categories:GunsSporting Goods

14554 impressions

1063 views

Lightly used Ruger Hawkeye Hunter in 7mm Rem Mag. (Designed by FTW Ranch) 24” barrel plus factory muzzle break. 1 inch Factory stainless Ruger rings. Nikon Pro Staff 4x12x40 scope (mint) Bell & Carlson Stock ($550 alone) Long Action, Right Hand Free Float Magnum Barrel Channel Computer designed and CNC machined full length 6061-T6 aluminum bedding system extends through forearm strength and stiffness. An additional Aluminum "tail piece" extends from the bedding block through the grip area for even more strength and rigidity. 1-inch Pachmayr Decelerator recoil pad 1 front sling stud and 1 rear sling stud 13.625 length of pull 31-inch overall stock length Approximately 2.0 lbs. OR $1700 NOW $1600 shipped with only rings NO scope. Xmas Special $1500 shipped . Add $250 with scope. No trade or low ball offer.

categories:GunsSporting Goods

8403 impressions

533 views

Brand new Non-restricted Lever Action Caliber: 44 Mag Capacity: 9 Barrel: 19.25″ 11/16-24 Threaded 410 Stainless Steel Sights: Gold bead front sight,XS Sights ghost ring rear sight Accepts mounts compatible with Marlin® 1894 hole patterns Black synthetic stock with textured grip panels M-LOK® synthetic forend with textured grip panels 1:20″ RH Twist 8-Groove Rifling Large loop operating lever Forged 416 SS Receiver Optic Ready Safety: Cross-Bolt Full Length: 36" Weight: 108.8 oz Made in USA

categories:GunsSporting Goods

2457 impressions

132 views

Brand new Non restricted Action : Lever Caliber : 410 GA Barrel length : 18.5″ Chamber : 2.5″ Capacity : 5+1 Finish : Black Furniture :  Walnut Stock & Birds Head Grip Hand Grip : M-lok with picatinny accessory rails. (aluminum) Choke Kit : F, IM, M, IC, SK, including case and key Front sight : Red Fiber optic Safety : Cross bolt Made in Turkey

categories:GunsSporting Goods

7370 impressions

491 views

Brand new Non-restricted SKU: 920.390 Action: Lever Action Caliber: .357 MAG Capacity: 6 Barrel Length: 12″ (305 mm) Feed In: Magazine Tube Stock: Hand Oiled Walnut Pistol Grip Forend: Hand Oiled Walnut Front Sight: Fixed Blade Rear Sight: Short Buckhorn Safety: None Length: 24″ Material: Steel Finish: Color Case Receiver/Blued Barrel Made in Italy

categories:GunsSporting Goods

4931 impressions

286 views

Brand new Non-restricted Lever Action Caliber: .30-30 WIN Capacity: 6+1 Barrel: 20″ 5/8-24 Threaded 410 Stainless Steel (Armornite finish) Sights: Gold bead front sight,XS Sights ghost ring rear sight Accepts mounts compatible with Marlin® 1894 hole patterns Walnut Stock with textured grip panels Walnut Forend with textured grip panels Large loop operating lever Forged 416 SS Receiver (Armornite finish) Safety: Cross-Bolt Full Length: 37.8" Made in USA

categories:GunsSporting Goods

7609 impressions

321 views