Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

15231 impressions

608 views

DEPRIMED AND TUMBLED - About 20 or so were fired twice while developing a load.......offered for sale ( case-gards included ) as I no longer shoot 9mm.    I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.

categories:Sporting GoodsGuns

2585 impressions

100 views

Offered for sale as I am l no longer reloading 9mm.  I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.

categories:Sporting GoodsGuns

2767 impressions

135 views

Selling-- ( shipping extra, no trades, e-transfer preferred ) Made by X-Metal Targets, Canadian made , 9mm , XTB 147 Grain Jacketed Round Nose bullets. Discontinued and hard to find. 249 pieces available. $18.00 per 100. Buy the works for $45.00, plus twenty dollar shipping anywhere in Canada.

categories:Sporting GoodsGuns

7534 impressions

336 views

Selling a variety of Hornady and RCBS SHELL PLATES. Can use regular letter mail for cheaper shipping. HORNADY SHELL PLATES lock-n-load AP. $60 each plus shipping. Shell plate #2 - 219 Zipper, 22 Savage, 25-35 Winchester, 30-30 Winchester, 30 Herrett, 32 Winchester Special, 32-40 Winchester, 375 Winchester, 38-55 Winchester, 7x30 Waters, 7.5x55 Swiss Shell plate #4 - 220 Swift, 225 Winchester, 6.5 JDJ, 7mm Merrill, 30mm Merrill Shell plate #13 - 9.3x74R, 7x57R, 7x65R, and others Shell plate #29 - SOLD Shell plate #35 - SOLD RCBS SHELL PLATES $60 per Shell plate Shell plate # 4 - 257 Weatherby Mag, 264 Win Mag, 6.5mm Rem Mag, 270 Weatherby Mag, 7mm Rem Mag, 7mm STW, 7mm Weatherby Mag, 30-338 Win Mag, 300 H&H Mag, 300 Weatherby Mag, 300 Win Mag, 308 Norma Mag, 8mm Remignton Mag, 338 Win Mag, 340 Weatherby Mag, 350 Rem Mag, 358 Norma Mag, 9.3x74R, 375 H&H Mag, 375 Ruger, 416 Remington Mag, 450 Marlin, 458 Win Mag, 458 Lott, 460 S&W Shell plate #6 - .22 Remington Jet, 5.6mm x 50 Rimmed, .357 Magnum, .357 Remington Maximum, .38 Smith & Wesson, .38 Special Shell plate #10 - .17 Remington, .17 Remington Fireball, 204 Ruger, .221 Remington Fireball, .222 Remington, .222 Remington Magnum ,.223 Remington (5.56mm), 6mm x 45, 7mm Thompson/Center Ugalde, .300 AAC Blackout , .380 Auto Pistol, 9mm x 18 Ultra Shell plate #16 - .30 Luger (7.65mm Luger), 30 Mauser (7.63 Mauser), .356 TSW, 9mm FAR, 9mm Luger, 9mm Makarov, 9mm x 21 9mm x 23 Winchester Shell plate #18 - 44 Magnum, .44 Special RCBS Little dandy rotor #8 $15 RCBS Little dandy rotor #23 $15 Flash hole deburring tool 6mm caliber $15 Pilot neck reamer .20 cal $10

categories:Sporting GoodsGuns

112400 impressions

4519 views

Beretta 92FS/92S 9mm Magazines 15 round clip Pinned to 10 rounds by factory For Canadian laws $100 Each Original Italian made magazine Can ship by Cad post Need copy of PaL Send me an email to Order

categories:Guns

15111 impressions

1262 views

(50) RNDS, 124 GRNS, METAL CASED, IN ORIGINAL COLLECTIBLE BOX(USED FOR STEN GUN) , SHOWS SOME WEAR. Can ship anywhere in Canada please see my other ads for rare and collectable firearms, accessories, and ammunition.

categories:Sporting GoodsGuns

43793 impressions

606 views

(50) RNDS, FOR USE IN SUB-MACHINE GUNS, IN ORIGINAL COLLECTIBLE BOX, SHOWS SOME WEAR. Can ship anywhere in Canada Please see other ads for where and collectable ammunition, firearms, and accessories.

categories:Sporting GoodsGuns

45146 impressions

780 views

This FAST ( Future Assault Shell Technology) combat helmet is tested to withstand 19 rounds from various caliber weapons including 2 shots of .44 mag, lighter rounds like hollow point 9mm barely scratched the surface. A user friendly release is mounted on left side of head. The ergonomic design of the internal harness and padding ensures comfort and full adjustability . Tested to: NIJ-0101.06 IIIA Standard ( 44mag., 9mm, .45 cal., .40 cal., .38, 12 gauge and many more) Defends against fragments, ballistic and blunt force trauma. External rail system and bungees to attach additional equipment . NVG front mount . Size Medium Carry bag . Brand New

categories:Sporting GoodsCamping and Survival Gear

11398 impressions

593 views

Mark7 Revolution International fully automated reloaded for sale. This is the Evolution reloader fully automated with automatic primer feed, case feeder, bullet feeder, laser powder measure, laser bullet sensor, primer orientation sensor. Fully loaded machine. The regular Revolution is not available for export from the USA, so this is the machine for the rest of the world. Used for two seasons of IPSC competition but has not been used for two years now. Comes set up for 9mm but can reload rifle calibres as well. Approximately 100,000 rounds loaded with it. Many spare parts and cover included. Replacement cost is approximately $20k USD before shipping and any tariffs that now apply.

categories:Sporting Goods

3217 impressions

262 views

I have over 30,000 once fired brass cases of many different calibers and head stamps for sale. Prices are as follows, followed by approximate amounts available. I can ship up to 5kg or 11 lbs anywhere in Canada for $20 flat rate. That would be (300 +-) 300 Win Mag cases and more of smaller cases. Check this ad periodically as brass will be added when available or deleted when sold out. 300 Win Mag $1.00 each (3,000 +- available) 7mm Rem Mag $1.00 each (2,200 +- available) 300 Win Short Mag $1.00 each (350 +- available) 7mm Win Short Mag $1.00 each (174 +- available) 270 Win Short Mag $1.00 each (SOLD OUT) 30-06 Springfield $.50 each (2,600 +- available) 308 Win $.50 each (1850 +- available) 270-Win $.50 each (1,650 +- available) 7mm-08 $.50 each (SOLD OUT) 243 Win $.50 each (800 +- available) 303 British $.75 each (350 +- available) 22-250 $.75 each (200 +- available) 30-30 Win $.75 each (500 +- available) 6.5 Creedmoor $.75 each (SOLD OUT) 350 Legend $.50 each (75 +- available) 223/556 $.25 each (5,000 +- available) 9mm Luger $.06 each (1,000 +- available) Some other smaller lots available. Text or email is best. Text: 780-876-5050 or email: jdwill1951@gmail.com

categories:Sporting GoodsGuns

140622 impressions

3766 views

Lyman all-american press "turret" 4 stations, come with 6 J shell holder. Grandpa wrote his driver license on the side station turret. Can be remove with dremel or sand paper. Excellent condition, saw more dust than work. Grandpa It exist a Lyman J to X shell holder adapter for modern shell holder available at Gotenda. Shipping fee on your side but it heavy weight. What you can do with J type shell holder included with the press. Info from Lyman shell holder chart #2 22-250 243 winchester 6mm remington 25-20  25-06 Remington  250-3000 Savage  6.5 Creedmoor  260 Remington 6.5x57 Mauser  270 winchester 7mm/08 Remington  7x57 Mauser  7x64 Brenneke 280 Rem (7mm Express)  300 Savage  308 Winchester  30-06  7.65 Argentine Mauser 8x57 Mauser  8x57 JS  7.9x57  35 remington 358 Winchester  35 Whelen  9.3mm x 62 401 winchester sl 45 ACP/.45 Win Mag 475 Wildey #6 7-30 Waters 30-30 winchester 307 winchester 32 Winchester Special  356 winchester 375 Winchester  38-55 Winchester #7 303 british 44 Mag/Spl/.44 Russian 460 S&W  50 Action Express #12 30 Luger  30 Mauser  38 Super Auto  9mm Luger  9 x 23mm 9mm Makarov  41 Action Express #13 7mm Remington Mag  7mm Weatherby Mag  7mm STW  7mm Rem. Ultra Mag. 300 Winchester Mag  300 Remington Ultra Mag.  300 Remington Ultra Mag SA  300 Weatherby Mag  8mm Remington Mag 338 Winchester Mag  338 Remington Ultra Mag. 375 Ruger 375 H&H Magnum  375 Rem. Ultra Mag.  450 marlin #19 22 Spitfire 5.7 Spitfire MMJ-5.7mm 22 R2 Lovell 25-20 Single Shot 30 M-1 Carbine 32 Auto-(6.5mm Auto). 

categories:Sporting Goods

5893 impressions

120 views

One 20L pail of once fired, de-primed washed 9mm brass  77.5lbs about ~8,912 cases  Send me an offer unsure what it's worth  Located in bonnyville  AB  Can ship canada wide but would probably cost alot, but I can price it out for your location 

categories:Sporting GoodsGuns

1239 impressions

64 views

Brand new This OEM factory original 5.0" barrel is constructed from steel and specifically for the Smith & Wesson M&P 9 M2.0 pistols chambered in 9mm. Featuring a black finish, this barrel is perfect as a spare on the workbench or as an immediate replacement for a lost or damaged component.

categories:Sporting GoodsGuns

3909 impressions

212 views

Brand new Manufacturer: Sig Sauer Fits: P320 Caliber: 9 mm Capacity: 10 Rounds Material: Steel and Polymer  Made in USA

categories:Sporting GoodsGuns

6266 impressions

782 views

Brand new Manufacturer: Pro Mag Fits:  Springfield XDM Caliber: 9mm Capacity: 10 Rounds Material: Steel and Polymer Made in USA

categories:Sporting GoodsGuns

7278 impressions

759 views

Brand new Fits: CZ P-07/P-10 C Caliber: 9 mm Capacity: 10 Rounds Material: Steel and Polymer  Made in CZ

categories:Sporting GoodsGuns

8394 impressions

811 views

Caliber: 410 GA Ounces: 0.39 oz Length: 2.5″ Bullet Style: No.8 Shot Type: Lead Rounds Per Box: 25 Made in Turkey BPS Balıkesir Explosives Industry and Trade Inc. (BPS A.S.) was established in 2014 by Mehmet Akif Yavaşca and Müşteba Yavaşca in order to produce the high quality small arms’ ammunition in Turkey. In the year 2015, Sarsilmaz Ammunition Inc. of the Sarsilmaz Group, which is an estimable small arms producer in Turkey and Europe, joined in the BPS A.S. as a partner and increased its power. In 2016, the production of shotgun cartridges started with the processing of quality raw materials by experienced personnel in modern machines with the principle of continuous development. In 2017, 9 mm blank cartridges and in 2019, 9x19 mm parabellum pistol cartridges production has started. BPS A.S. currently loads 46 types of cartridges for small arms and expands its product range every year.

categories:Sporting GoodsGuns

9090 impressions

613 views

Brand new Manufacturer: Sig Sauer Fits: P320 Legion Caliber: 9 mm Capacity: 10 Rounds Material: Steel and Polymer  Made in USA

categories:Sporting GoodsGuns

7582 impressions

884 views

For sale brand new , X- Caliber Gauge Adapter made by Chiappa firearms. From 20 Ga to .357 Mag, 45 ACP, 9mm Luger and 410. All four are 7 " long and rifled. e-Transfer Shipping included.

categories:Other

12535 impressions

674 views

Hey there. 180 pieces - .30-06  Brass, $45 1000 Pieces - 9mm Brass, $50 Price is plus shipping.  No trades, pls.

categories:Sporting GoodsGuns

970 impressions

71 views