Photo of vintage 1930s “Pipe-A-Dor” tobacco humidor & Pipe stand made by Colt Firearms
Photo of vintage 1930s “Pipe-A-Dor” tobacco humidor & Pipe stand made by Colt Firearms
Photo of vintage 1930s “Pipe-A-Dor” tobacco humidor & Pipe stand made by Colt Firearms
Photo of vintage 1930s “Pipe-A-Dor” tobacco humidor & Pipe stand made by Colt Firearms
Photo of vintage 1930s “Pipe-A-Dor” tobacco humidor & Pipe stand made by Colt Firearms
Photo of vintage 1930s “Pipe-A-Dor” tobacco humidor & Pipe stand made by Colt Firearms
Photo of vintage 1930s “Pipe-A-Dor” tobacco humidor & Pipe stand made by Colt Firearms
Photo of vintage 1930s “Pipe-A-Dor” tobacco humidor & Pipe stand made by Colt Firearms
Photo of vintage 1930s “Pipe-A-Dor” tobacco humidor & Pipe stand made by Colt Firearms
Photo of vintage 1930s “Pipe-A-Dor” tobacco humidor & Pipe stand made by Colt Firearms
Photo of vintage 1930s “Pipe-A-Dor” tobacco humidor & Pipe stand made by Colt Firearms
Photo of vintage 1930s “Pipe-A-Dor” tobacco humidor & Pipe stand made by Colt Firearms
Photo of vintage 1930s “Pipe-A-Dor” tobacco humidor & Pipe stand made by Colt Firearms
Photo of vintage 1930s “Pipe-A-Dor” tobacco humidor & Pipe stand made by Colt Firearms
Photo of vintage 1930s “Pipe-A-Dor” tobacco humidor & Pipe stand made by Colt Firearms
$150
vintage 1930s “Pipe-A-Dor” tobacco humidor & Pipe stand made by Colt Firearms
Item #1 $150 made by Colt Firearms (Colt’s Patent Fire Arms Manufacturing Co., Hartford, Connecticut). It’s constructed from Bakelite (an early plastic, branded here as “Coltrock” or “Genuine Coltrock”), which gives it that dark, glossy, almost metallic-looking brown/black finish. This piece is a combination item: • Central humidor — the lidded container in the middle holds pipe tobacco and keeps it fresh (classic tobacco storage). • Built-in pipe rack — around the sides, there are slots/holders (typically 7, one for each day of the week, like Monday through Sunday) where a pipe smoker could rest their pipes. • Base — the base has had some previous damage that was repaired using an epoxy compoundthe wide octagonal tray catches ash or drips and adds stability/display appeal. It often has decorative elements like fluted columns and embossed patterns (e.g., leaves or ornate borders on the lid). Item#2 $350 1930s Colt “Tobac-A-Dor” (or “Tobacco-A-Dor”) rotating/multi-blend humidor made by Colt’s Patent Fire Arms Manufacturing Co. in Hartford, Connecticut, from their Coltrock (branded Bakelite/plastic) material. The key feature here is the built-in Lazy Susan (revolving/carousel) base, which allows the octagonal bottom section to rotate for easy access to different labeled compartments or blend sections. From your photos and description: • The central lidded jar holds the main tobacco supply. • The embossed floral/leaf patterns (grapes, foliage, flowers) match the Art Deco style of the series. • The base labels “LADIES” and “EGYPTIAN” refer to specific tobacco blends (common in 1920s–1930s marketing: “Egyptian” for exotic/Oriental-style tobaccos, “Ladies” for milder, scented, or feminine-oriented mixes like pot-pourri types). In full multi-blend models, the revolving base had multiple labeled divisions (e.g., American, English, Turkish, Pot-Pourri, Egyptian, Ladies) around the edge, letting users spin to select/access compartments while the lid sealed the primary humidor. • This design was a novelty for pipe/cigarette smokers who liked variety—rotate to grab a different blend without lifting the whole piece. These are scarcer than the standard 7-day pipe rack “Pipe-A-Dor” versions, as the rotating mechanism adds complexity and appeal to collectors. Overall, this is an excellent condition without any chips or damage 10 out of 10 and original.
categories:Household ItemsCollectibles
188 impressions
35 views
Chestermere, AB1 day ago
Photo of Chevy 2500HD 6.0L with VMAC
Photo of Chevy 2500HD 6.0L with VMAC
Photo of Chevy 2500HD 6.0L with VMAC
Photo of Chevy 2500HD 6.0L with VMAC
Photo of Chevy 2500HD 6.0L with VMAC
Photo of Chevy 2500HD 6.0L with VMAC
Photo of Chevy 2500HD 6.0L with VMAC
Photo of Chevy 2500HD 6.0L with VMAC
Photo of Chevy 2500HD 6.0L with VMAC
Photo of Chevy 2500HD 6.0L with VMAC
$37,200
Chevy 2500HD 6.0L with VMAC
2015 Silverado 2500HD LT 4x4 Crew Cab regular box Very well maintained truck with vast majority of use on highway. Clean car fax with no collision or theft history. Regular synthetic oil changes, 80-95% remaining on brake pads, new Nokian Outpost tires in Nov, excellent paint condition, transmission / diff oils changed by Transmission shop (not a quick-lube type place that does damage with a flush) at 90,000 and 180,000 km and not a spec of metal on the magnet when the pan was dropped. All new spark plugs at 190,000 km. Needs nothing. Will buy new windshield and oil change for new owner. This shows like a much newer truck and you will see the difference in person. Don’t want to put a crack in a new windshield before you get possession so we can discuss when to put that in for you. A new owner can put it to better commercial use as it is just my daily driver and I’m not using the VMAC air compressor unit as I intended. $19,000 unit installed in 2019 and less than 25hr of use. Canopy locks with ignition key, 50 foot retractable reel with holding tank inside the canopy. Iconic workhorse 6.0L L96 engine with a 4.10 gear ratio made to tow. Only thing it has towed is a small snowmobile trailer (single axle, barely fits a single machine) and a couple small boats - less than 30 tows in total. This unit is turnkey ready to go to work for your business. You are welcome to get it to a mechanic shop you trust if you want to pay for your own inspection for peace of mind. Once you see this you will see why it’s in better condition than the rest. Not looking for anyone to sell this on my behalf and unsolicited requests as such will be reported according to CASL. Private sale, no gst.
categories:Auto and TrailersTrucks
1582 impressions
52 views
Sherwood Park, AB2 days ago
Photo of Brand new MAGPUL 1913 Pictinny Rail Bipod-FDE $180
$180
Brand new MAGPUL 1913 Pictinny Rail Bipod-FDE $180
Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA
categories:Sporting GoodsGuns
3171 impressions
520 views
Calgary, AB2 days ago
Showing 21 of 236 records
Location
Search within
of
Categories

Medical Equipment16

Other1

Transportation options

Local Pickup210Can Deliver27Can Ship56