Prices A - Single Sided Kit - $20 B - Double Sided Kit - $30 **$5 off each additional kit for any order combo (2 or more) **Ex. A+B=$50-($5 discount)=$45 Total **3x A=3*$20=$60-2*($5 discount)=$50 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) ___________________________________ Single Sided Specs/Instructions Specifications Black Anodized Stainless Steel Weight: 0.2oz (6g) Length: 0.571" (14.5mm) Equivalent to Magpul Type 1 Sling Mount Kit Kit comes with the following 1x Stainless QD Insert 1x Stainless Washer 1x Stainless Nut 3x Stainless Screws (1/2", 3/4", and 1") What you will need 1/8" Allen Key Wrench 5/16" Socket Screwdriver/Wrench Blue Loctite (Optional) Instructions 1. Insert QD Insert into stock on the desired side 2. Insert one of the 3 screws through the hole on the QD Insert 3. Insert a washer on the opposite side 4. Apply a drop of Loctite on the threads of the nut (optional) 5. Using the Allen Key Wrench and 5/16" Socket fasten the nut on the screw 6. Fasten the assembly until snug using the Allen Wrench ___________________________________ Double Sided Specs/Instructions Specifications - Black Anodized Stainless Steel - Weight: 0.4oz (12g) - Length: 0.571" (14.5mm) *each insert* - Equivalent to Magpul Type 1/Type 2 Sling Mount Kit Kit comes with the following - 2x Stainless QD Insert - 4x Stainless Washer - 3x Stainless Screws (1/2", 3/4", and 1") What you will need - 1/8" Allen Key Wrench - Blue Loctite (Optional) Instructions 1. Insert QD Inserts into stock on both sides of the stock 2. Insert one of the 3 screws through the hole of the unthreaded QD Insert 3. Using the Allen Key Wrench thread the screw and temporally fasten the assembly together 4. Function check using the QD Sling Mount on both sides 5. If the bottom of the screw is protruding too far out, remove the QD Inserts and shim off the QD Inserts with the provided Washers 6. Once the correct Screw and Washer Shims (Optional) is determined, the assembly can be fastened together 7. Apply a drop of Loctite on the threads of the Screw (optional) 8. Fasten the assembly until snug using the Allen Wrench 9. *If the Threaded Insert is spinning on it's own, the Insert can be retained via Retaining Hole with a smaller Allen Wrench (See Last Image)

categories:Sporting GoodsGuns

9564 impressions

1037 views

I have Lawnmowers, snowblower, water pumps, leaf blowers, weed eaters, generators, pressure washers, chainsaws, lawn tractors, cutoff saw, trikes, outboard motors, small engines - all for parts. Replacement engines also available. I also have some new parts as well. Please have a look at all the pics! You can also view my ads on Kijiji.ca just search "Gabes Small Engine Parts" Feel free to ask any questions! Text 587-777-3606 thanks

categories:Auto and TrailersAuto Parts

8822 impressions

914 views

I have Lawnmowers, snowblower, water pumps, leaf blowers, weed eaters, generators, puressuer washers, chainsaws, lawn tractors,small quad (sold), small durt bike, small engines all for parts. Replacement engines also available. I also have some new parts as well. I can also sell the whole thing if your interested. Feel free to ask any questions! Text 587-777-3606 thanks

categories:Yard and Garden

15483 impressions

1687 views

Pick your cart, make an offer, and we can make a deal!! Willing to meet in Edmonton. And don't forget to look at my other ads!

categories:Yard and Garden

3800 impressions

310 views

Are you into small engines? Well this is the sale for you!!! I'm looking to sell my hord of lawnmowers, snowblowers, leaf blowers, weed wackers, generators, pressure washers, water pumps, replacement engines, and more! Text 5877773606 to make me an offer so you can start fixing, shining, and raking in the $$$$ Most need work but some do run. Come get them befor it snows!

categories:Yard and GardenLawn Mowers

1109 impressions

121 views

I have some gun shirts still available that I have designed and sold in gun shows past, although it has become too cost prohibitive to travel to shows now, so I'm just looking to get my money back. They're 100% cotton and machine washable, just flip inside out and wash with cold water to protect the silkscreen. I have only a couple each in black, OD green and grey. Sizes are Large, XL, Medium and 2XL. Shirts are $20 each, with Canada wide shipping available at a flat rate of $17. PM me with your choice of shirt, size and color and I'll let you know what I've got left.

categories:Sporting Goods

19141 impressions

1065 views

Crush Washer LR-308 Stainless Steel 5/8" Shipping extra

categories:Sporting GoodsGuns

8470 impressions

354 views

Flash hider with crush washer 1/2x28, 22 caliber group, new Shipping extra

categories:Sporting GoodsGuns

8504 impressions

349 views

Hi, selling a custom made 3 port muzzle brake for large calibre rifles. tread pitch is standard 5/8-24. brake is large enough to fit calibres up to .45cal. made of stainless steel, black nitrided, Up to 80% recoil reduction. two adjustable vertical rise screws included, and 5/8" crush washer also included. 4.5" long, 2 inch wide, and 1.25inch tall (aproxx) aprox 1lb. in weight. I shoot it with my 300PRC and 30-06, its loud as #$%#$ but almost no felt recoil! makes my 300prc feel like a 223. limited production run, 2 left of 10 price is $250-OBO

categories:Sporting GoodsGuns

24335 impressions

938 views

THANK YOU (6 in.), Sentiments series HN3124, 1st year of issue, 1991, $35 with box DIANA HN2468, (8"), 1985, $75 FLOWER OF LOVE, 1st issue, 1991-1997 HN2460, $60 SUMMER ROSE HN3309 1990, $50 Figure Of The Month MAY (5") Peggy Davies, HN3334, $40 Figure Of The Month MAY (7.5") Peggy Davies, HN2711, $55, last photo Cynthia, green dress yellow top, HN 2440, $65, last photo 1988 Figure Of The Month JUNE HN 2790, $55 ALICE, HN 3368 excellent condition, made in England, 1990, signed by Michael Doulton, $80.00 HER LADYSHIP HN 1977, was issued from 1945 to 1959, made in England, 7" tall, $65.00 NINETTE, yellow, HN 2379, $65.00 SECRET THOUGHTS, green, HN2382, $65.00 MARIE, small purple, HN1370, $30.00 COUNTRY ROSE HN 3221, 1988 Modelled by Peggy Davies, $85 MY LOVE, HN2339, $50 White Dress with rose MARGARET HN2397, $40.00, lady in a white dress and a blue ribbon around her waist DARLING HN1985, $15, boy with blanket Royal doulton flowers in a shell with box, $20

categories:Household ItemsCollectibles

3804 impressions

574 views

RICASSO MARKED: "U.S.M.C.", OTHER-SIDE MARKED: "CAMILLUS, N.Y.", LEATHER WASHER GRIP, METAL POMMEL, NO VISIBLE MARKINGS, BLACK LEATHER SCABBARD, NO VISIBLE MARKINGS, BLADE APPROX. 7" & OAL APPROX. 12". Can Ship Anywhere, Please see my other Collectable Accessories and Rifles.

categories:Sporting GoodsCamping and Survival Gear

13053 impressions

1190 views

The finest .338 I ever shot or bought. Originally a Kimber Montana. The barrel is trimmed to 23” and I have added an aftermarket titanium bolt handle. I also put her in a Pendleton composite stock with a 14.75” length of pull. This also adds bottom metal so it has kimber floor plate and mag box and you gain the ability to unload out the bottom. It’s also a slimmer stock so it doesn’t feel pregnant around the mag well like the 8400 montanas did. It feels slim, carries like a dream and recoils straight back. I found the recoil to be much less than any other .338 I owned in spite of its light weight. In other words, don’t be afraid of this one, if you can handle a .338 at 9-10lbs you can handle this one. Total scoped weight with a 2.5-8x36 Leupold was 6lbs 15 ounces. I’m selling without the scope but it will come with the tally rings. This rifle is very accurate and I shot many one hole, three shot groups. Will be sold face to face in penhold. I’m listing this one with photos from when I put it into storage and there is lanolin grease visible on the steel. My brother has since cleaned it up and has it in his safe but I don’t have current, clear pics of it without the grease on it so you’re going to have to look past that.

categories:Sporting GoodsGuns

1410 impressions

140 views

Good USED condition. Made by the Jolly Jumper company. Beige winter-weight, lined with fleece. Fits babies up to 9 months. Slits for car seat harness. Un-zips on both sides so top can be removed if desired. Machine washable (it has been washed). Just $5 in the garage sale inside Baby Love Products, 5015-46 St, Camrose. If this ad is up, the item is still available. Please come in person as we cannot answer messages. Open Mon-Fri 10-5, Sat 10-3.

categories:Household ItemsKids and Baby Items

678 impressions

83 views

Whirlpool duet dryer. Washing machine went so we ordered new pair. Dryer still works fine video can be sent from this morning.

categories:Household ItemsAppliancesWashers and Dryers

711 impressions

96 views

Repeat breeding with top talent throughout. FC/AFC Wham was the #2 dog FT in Canada last year in Amateur All Age, super talented with stacked 5 generation pedigree out of NFC Sledgehammer. Mom is out of my GMH WCX female who is out of NFC Mickey & NFC Troubadour bitch line with FC Bronco 4X Canadian Nationals Finalist as her sire. Mom is a finished dog has 100% pass rate in Masters. Will make sublime companions , hunting dogs or competitor. This is a repeat breeding that will take the guess work out

categories:Pets and AnimalsDogs

3132 impressions

242 views

Rentals, please contact for pricing, daily or weekly rates. Message or text only. LOG SPLITTER CORDED 120V CONSTRUCTION HEATER PROPANE 120V WATER PUMP GAS 2 INCH PRESSURE WASHER GAS PRESSURE WASHER CORDED PRESSURE WASHER GUTTER CLEANING WAND SNOWBLOWER 10HP LAWN MOWER, ELECTRIC BATTERY SMALL LAWN MOWER, ELECTRIC BATTERY LARGE SELF PROPELLED ROTOTOLLER/EDGER SMALL CORDED TRIMMER, STRING GAS TRIMMER, MULTI HEAD (EDGER, STRING, GRASS PADDLE) GENERATOR 6kw GAS GENERATOR 3kw GAS 120V PURE SINE LEAF BLOWER/VACUUM CORDED TABLE SAW SAWZALL CORDED LARGE CIRCULAR SAW JIGSAW SANDER PLANER DRILL PRESS BENCH-TOP 3/8 DRILL 1/2 INCH CORDED NAILER FRAMING, AIR NAILER BRAD, AIR LADDERS: 14 FT A-FRAME FIBERGLASS ELECTRICAL RATED - 12 FOOT COMBINATION - 10 FOOT A-FRAME ALUMINUM - 6 FOOT A-FRAME ALUMINUM HAND TRUCK SOLID TIRES LIFT TABLE/CART HYDRAULIC CART, PLATFORM CART, HOUSEKEEPING RUBBERMAID ENGINE STAND BALL JOINT PRESS KIT 3/4 INCH SOCKET SET AIR HAMMER LONG STROKE AIR HAMMER SHORT STROKE IMPACT GUN CORDED 1/2 FLOOR JACK JACK STANDS PORTAPOWER HYDRAULIC 10 TON VACUUM FLUID EXTRACTOR COME ALONG PORTABLE MANUAL WINCH SERVICE CART, 2 TRAY WELDER MIG 120V WELDER ARC 240V

categories:Tools and Equipment

2117 impressions

196 views

**Letting her go to her new home along with all of her supplies for FREE due to urgent need for rehoming on account of not being able to care for her.** This is Rosie, she is a 9 month old "Cowboy Corgi" (Australian shepherd/blue heeler/corgi mix). We have had her since she was weaned, and she has proven to be a very loyal, affectionate, and good natured dog. She is extremely patient with our toddlers, and our cat is her best friend. She responds very well to commands and is eager to please, she's generally house trained and never has accidents overnight. She likes to play fetch, and most of all to be by our side. While she is skittish when meeting new animals, she is quick to warm up to strangers. Rosie has been an excellent dog, however it is clear that she is unhappy lacking a purpose and a wide open place to call home. We believe she would do best with an acreage, or at least a back yard, to run around in, and lots of attention and care to help direct her energy. Supplies include large crate, dog bed, bowls, food, food container, toys, harness, and leash.

categories:Pets and AnimalsDogs

4301 impressions

258 views

Steel gas block, non-adjustable, .750" gas journal $20 * Luth Steel ar15 adjustable gas block .750" gas journal $50 Mid length gas tube $20 Rifle length gas tube $5 (silver) Rifle length gas tube $8 (melonite/black) Anderson Charging Handle $20 H carbine weight buffer $30 H2 carbine weight buffer $40 H3 carbine weight buffer $50 LBE 223/556 Bolt, firing pin, cam pin kit $125 Hammer/trigger pins $5 (for a set of 2) Magazine catch and spring $5 Bolt catch (includes spring, roll pin and detent) $5 Buffer detent $1 (no I do not have detent springs) Takdown/pivot pin spring $2 Trigger guard $2 Faxon 18.6" barrel w/ adj gas block and gas tube (installed but not used) $300 Crush washer for 1/2" diameter threaded muzzle devices $2 1/4x28 3/4" length bolt $2 Anti-walk pin kit $20 15" mlock handguard $120 Vism mid length triangular aluminum handguard $40 _____________________________ With the exception of the barrel, all parts will be shipped in a canada post pre paid box for $19. Unless noted, all parts are new. Pick up available in SE Edmonton; minimum value for pick up order is $20 *can be installed sideways to block the gas port for renegade builds

categories:Sporting GoodsGuns

6368 impressions

286 views

The RB 400 DIRT BOSS® comes with 196 cc (6.5 hp) Kohler engine that can output 2,700 psi of water pressure at 2.7 gallons per minute. With its 25' no-kink flex hose, you can clean more area without having to move the machine. Finally, the pressure washer includes a rotary floor washing brush which is a $160 item if bought separately. Very low hours. Like new condition.

categories:Tools and Equipment

951 impressions

93 views

in perfect working condition just a bit older. i just got a new set to match my home.

categories:Household ItemsAppliancesWashers and Dryers

415 impressions

358 views