Now that I'm in my late 70's , I am downsizing my antique gun and militaria collection to move into a much smaller house with a much smaller gunroom.......offering an original 1880's Mills pattern , woven ammo belt with a rare 1881 Patent Mills/Orndorff brass buckle and retainer. The loops hold .40 to .45 caliber rounds and included are twenty .44-90 Sharps bottleneck cartridges. Please view the photos closely as the belt has been well used and has some damaged loops and earlier field repairs.....I have always refrained from doing any repairs or "enhancements" to my original antiques as the wear and tear is a natural part of its history and character. The cartridges are not original but are repro brass which was purchased about 45 years ago and which I loaded with black powder and some very old primers which were purchased about 50 years ago ( used for display purposes only ). The belt and attached buckle were purchased by me in 1967 at an Ohio gun show. The brass buckle has that beautiful patina which only time can create and it does have a few dents from honest wear and tear.....contact me if you interested and need more photos, or different angles, as the website only allows 10 photos. This is a rarely encountered ensemble.    I am willing to ship at "BUYER'S EXPENSE" but it will need to be by a trackable and insured method, or I offer local pick up --- OF COURSE I CANNOT SHIP THE BLACK POWDER CARTRIDGES WITHOUT REMOVING THE POWDER AS THEY ARE CLASSED AS EXPLOSIVES.......THIS COULD BE POSSIBLE AS I HAVE NEVER CRIMPED MY SHARPS CARTRIDGE RELOADS WITH PAPER PATCHED BULLETS. I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.               *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

326 impressions

17 views

This is from the estate of my late father in law, who was an avid gun collector. No this is not in pristine museum quality condition. Prices reflect condition. Offers may be considered, but low ballers will be ignored or told to F off. If you don't like the price keep scrolling. There is a small crack in the stock as seen in picture. This comes with 28 rounds of ammunition..

categories:GunsSporting Goods

12571 impressions

781 views

This is from the estate of my late father in law, who was an avid gun collector. No this is not in pristine museum quality condition. Prices reflect condition. Offers may be considered, but low ballers will be ignored or told to F off. If you don't like the price keep scrolling. This 5 shot rifle was built by Lee Enfield in 1950. Ser # H15408. There is a small crack in the Fore stock, and the safety lever is missing..

categories:GunsSporting Goods

22568 impressions

1165 views

Shotgun adapters are back on hand now! Free shipping Canada wide on all orders over $250! Convert your 12ga shotgun to fire pistol ammunition! These are RIFLED adapters! We have various calibers and we have both short compact adapters and full length ones. The short ones are far lighter and great for plinking/bug out bag. The longer adapters are quite accurate and can even be used for small game hunting. We sell these in 22LR, 9mm, 40S&W, 45ACP, 357MAG, 44MAG. https://partsonly.ca/product-category/shotgunadapters/ Please head to our website to check stock status or make a purchase. You can reach out directly to info@partsonly.ca with any questions. All major credit cards accepted, e-transfer accepted.

categories:GunsSporting Goods

14348 impressions

639 views

Description Small bore hunting match repeaters of the series 64: This model shares the action and design with the series 1416 and 1516, but with specific stock design and fitted with the acclaimed heavy target barrel. The basis of this model is the sturdy Match 64 barreled action, equipped with a target two-stage trigger with adjustable position and the universal Multi Purpose Beavertail stock. The Beavertail stock is widely different from the traditional European hunting stock. Created from the requirements of varmint hunters from the „New World“ this stock combines the advantages of classic target barrel with the wide and easy to handle Beavertail forend. An integrated accessory rail in the forend rounds the versatility of these models. A very field useable sport/target accuracy level variant with a constantly growing popularity. Barreled Action The action is used in the ANSCHÜTZ Luxus repeaters 1416/1417 and 1516/1517. This is a bolt action with cam cocking, claw extractor, additional cartridge holder and ejector. Telescopic sight mounting is by an 0.43" wide ANSCHÜTZ Wave Style V-block dovetail rail or by additional drilled and tapped holes. The sliding safety catch onthe right hand side blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. Trigger ANSCHÜTZ target two-stage and single-stage triggers have always set the standard for quality, reliability, and precision. It is not without reason that ANSCHÜTZ triggers are known as the best in the world. Many manufacturers offer adapters for integration of this master­piece of the German gunsmith‘s art into their firearms. The light weight, hardened and finely ground trigger components facilitate fast and consistent trigger release. Barrel • Cylindrical precision match barrel. • Manufactured using an ANSCHÜTZ special process. • Excellent shooting performance. • Recessed muzzle. • Reinforced muzzle with 11 mm wide prism rail for front sight. Sight set This model is delivered without sights. However, the system sleeve and the barrel end are equipped with an 11 mm wide prism rail for attaching a rear sight and front sight tunnel. Stock The lacquered multi-purpose beavertail stock has nothing in common with the classic European hunting stock. The wide, easy-to-use beaver tail fore-end with integrated aluminum profile rail can be quickly and easily added to other accessories such as Handstops can be fitted. The easy-to-grip hallmarking on the handle offers optimal hold even in damp weather. The buttstock with black rubber cap 4709 A is prepared for a clamping piece, which enables cap extensions to be attached. Therefore, this shaft is also ideal for hunting competition shooting. Butt Plate Straight, with guide plate 4709 A-U2/1 and set screws. • Non-slip rubber butt plate 4709A. • Prevents slipping of the butt plate in position. • Stepless hight adjustment. SKU 17479 MPN 009977 Total length (cm): 110.0 Total weight (kg): 3.9 Barreled Action Material: Steel Locking: Locking lug Finish of the reciever: blued Trigger Type: Two stage trigger 5098 Version: right Adjustment of the trigger shoe (mm): 17 Trigger blade: 007434 Color of the trigger shoe: Silver Safety: Sliding safety catch on the right side Trigger weight, adjusted (g): 180 Adjustment of the trigger weight (mm): 175-450 Barrel Material: Steel Finish: blued Caliber: .22 l.r. Length of twist (mm): 420 Number of grooves: 8 Rifling (mm): 644 Barrel verison: heavy Muzzle diameter (mm): 24 Barrel length (mm): 646 Stock Aluminuim grooved rail on the lower side: yes Stippled checkering: yes Length of stock (mm): 770 Stock type: Multi Purpose stock Butt plate: Rubber butt plate Material: Hardwood Stock color: dark Stock finish: laquered Length of pull (mm): 350 - 370 Prepared for claming element: yes Butt Plate Material: Rubber Adjustable (mm): 65 mm Weight (g): 210 g

categories:GunsSporting Goods

78081 impressions

2343 views

I have a 1941 XIX 6.5 x52 Carcono single shot for sale. gun is in good working condition, stock is in good condition has some small scratches shown in pictures. bolt is in great condition for age, has been modified to single shot. open to trades. Located in evansburg but make frequent trips to spruce grove .

categories:GunsSporting Goods

61136 impressions

3420 views

I have an excellent condition antique French percussion pistol from the time of King Louis-Phillippe circa 1830s for sale. This firearm requires no license to own or shoot due to its age. I bought this gun from a Quebec antique arms dealer a few months ago and unfortunately need to move it on due to house renovations. This gun had its lock repaired by Bernard Riendeau, a Quebec master gunsmith specialising in antique arms. It is fully functional. This gun is in excellent condition, excellent bore, all engraving and wood intact. There are some small dents here and there on the stock, and minor wood loss around the front stock pin. There is some pitting around the nipple area as seen in pics. This gun had been test fired by Bernard, but I haven't had time to try it. Because the lock was rebuilt it is quite stiff. Half and full lock are, of course present. The engraving on the top of the receiver says Patent Rohre, with serial number 6923 engraved on the bottom of the grip. It will come shipped with the letter of authenticity as well as a silicone gun sock. I am looking for $1750 shipped by Canada Post. Selling under retail price for a quicker sale. Cash or EMT only. NO TRADES PLEASE. Insurance is extra and on the buyer.

categories:GunsSporting Goods

1527 impressions

82 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:GunsSporting Goods

12596 impressions

418 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

10835 impressions

235 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

19890 impressions

731 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

12316 impressions

375 views

Howdy Townpost. I am selling this Remington 3.5inch Super-Mag that I picked up from BassPro in Calgary. I never got around to shooting it but I got a deal on it so I'm willing to let it go for cheaper than usual. This was a store demo gun, which essentially means it was dry cyled and shown to customers a few times. It's more or less a brand new shotgun. There's hardly any wear on it with the exception of some cosmetic blemishes from some small patches of surface rust that formed on the parkerized receiver. I suspect they never oiled it and peoples hands or just some moisture caused it. I cleaned it off and oiled the whole gun. It's pretty smooth even though it's a new gun and hasn't been broken in. The rubber recoil pad is still nice and soft The date code looks like AJ so it's a 2015 production. It was kicking around BassPro for almost 11 years! These regularly retail for $750+tax but occasionally go on sale for $650+tax. So I think $630 with no tax is not a bad deal for an essentially brand new shotgun. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's pretty short when broken down, and is light so it should be relatively inexpensive to ship. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:GunsSporting Goods

2641 impressions

151 views

The word Paragon means, “a model of excellence”. And this is true of this optic series. I see the Paragon as being the technological descendant of the old Bellorussian PK-AS sight, a one power prism sight that through innovative use of lenses, seems to have a nearly non existent edge when you look through it. Thick opaque edges serve only to limit situational awareness. Competing brands and their prism sights are a miss due to large knobs… they are “good enough”. But the nearly invisible edge of the PK-AS and later on the Paragon discarded the idea that “good enough” was actually “good enough” in regards to situational awareness. Unlike the PK-AS, the Paragon is designed to be small and light. All Paragon models also boast the best eye relief when ranked against competing micro prism sights. -------------------------------------------- Vector Optics Paragon x1 The design of he Paragon x1 is as low profile as possible. No opaque protrusions to reduce situational awareness. Controls, windage and elevation adjustments are close to the body of the optic. It is ideal for someone wanting a close quarters optic but not wanting to be at the mercy of batteries. In the cold Canadian climate there is some wisdom in avoiding something battery dependent in the outdoors. The one power paragon has a circle dot reticle which, according to gestalt psychology, draws the eye quickly to the center. It is a reticle type which is faster to acquire than a dot or a crosshair. The Paragon x1 comes with a low mount and a high mount to be optimized for a large variety of firearm types, from the traditional Mossberg shotgun to the 180C. Caliber Range (max): 12ga, 338. Ideal For: Shotguns, PC9, SKS, FX9, Scorpion, Raven 9, Templar, wk180, ws-mcr, tavor -------------------------------------------- Vector Optics Paragon x3 The design of he Paragon x3 is as low profile as possible. No opaque protrusions to reduce situational awareness. Controls, windage and elevation adjustments are close to the body of the optic. The 3 power prism sight is ideal as a battlesight for modern sporting rifles as the 3 power gives a flexibility at close, medium and occasionally longer ranges quite comfortably. 3 power, in my opinion, is the maximum magnification your brain can resolve with 2 eyes open style shooting. 3 power is ideal for people expecting to engage targets at 300 meters or closer. The x3 Paragon is lightweight and small measuring 3" in length weighing only 225g. The reticle has a drop compensator for 223 balistics. Caliber Range (max): 12ga, 338. Ideal For: FX9, Scorpion, Raven 9, Templar, wk180, ws-mcr, tavor, crypto -------------------------------------------- Specter Arms is a dealer for Vector Optics and the x1 Paragon is not the only thing in stock. Red dots, scopes and micro reflex sights are all available on the website. Send a text to 7809079585 for more info. Do you need to outfit your family or survival group? Ask about bulk discounts on multiple quantities of the same product. Maybe you need something a bit more for competition? Check out my ad for red dot and reflex optics. Please click on my user name for other ads and shipping policies. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:GunsSporting Goods

123657 impressions

3621 views

Used Browning Silver Feild max- 7 camo FDE, 3.5" chamber 28" barrel Comes with 3 chokes( F, IC, M), magazine plug(waterfowl), choke tool, lock, and manuals Used many days in the blinds, Shoot and operates, just cleaned. **Had some gunsmithing done to correct gas valve(see picture) cycles much better. Looking sell or trade locally. Would consider trades on small centerfire caliber rifles, lever actions, 20 gauge semi autos, sxs or U/O. Would also add cash for right trade. Cash purchase $1300 One of the cheaper semi autos New retail price $1600-1800 Always heard "if you want a reliable semi-auto shotgun, stick with the 3 B's(Browning, Benelli, or Beretta)" Browning Silver Field Auric FDE 12ga 3.5" 28" inv+ - Silver Willow Sporting Club https://share.google/3HZNZeu0LDSip7JOS

categories:GunsSporting Goods

4561 impressions

235 views

Looking for a Christmas present? Good utility hunting rifle...backup gun for that fancy 6.5 Creed? Truck gun? Look no further. Rifling strong. Shoots great. Goes bang every time. Barrel is full length. Some pitting on outside of barrell. Looks to have been an Indian gun made by Birmingham Small Arms Co. (BSA) $300 Call or text 4039238656 In Grand Prairie but can ship for $60

categories:GunsSporting Goods

3584 impressions

315 views

My wife liked this gun and I bought it for her . She shot it one time and decided she wanted a smaller gun . Price is firm .

categories:GunsSporting Goods

2013 impressions

233 views

Looking for a used Daisy Model 105, the smaller version of the red ryder. Doesn't need to be pretty, just needs to work.

categories:GunsSporting Goods

1377 impressions

144 views

I have about 10 pounds of various gun powder’s suitable for reloading .410 shotshells or small cased varmint ammo (eg. 22 Hornet, 221 Fireball) . 3 pounds of Winchester 296, 2 pounds of H110 (same load data as Winchester 296), 1 pound of Hogdon Lil’ Gun, 1 pound of Winchester 680, 4 pounds of Bulk 116S that uses Winchester 680 load data. Data load example: With both the Winchester 296 and the H110 the load for .410 would be 15.5 grains of one of these 2 powders to 1/2 an ounce of shot. I’m asking for $40.00 a pound “or” trade the equivalent weight of suitable shotgun powder for 20 gauge shotgun reloading (eg. Universal Clays, SR4756, Green Dot, Unique, SR7625, PB, 700X, 473AA, Herco, 800X, HS-7, 540, 571.

categories:GunsSporting Goods

6160 impressions

149 views

Cal: .455 Webley Finish: Finish is grey Mechanics: Functions well in both single and double action. Bore: Bore on the 6” barrel is dark with sharp lands and a small amount of freckling. Stock: Grip is in nice condition, possibly a replacement. This model was used by the northwest mounted police. Price includes shipping. Will come with an RCMP FRT report with this guns serial number showing status.

categories:GunsSporting Goods

18096 impressions

704 views

Cal: .41 Rim fire Finish: Retains approx. 40% of its original nickel finish Mechanics: Action functions perfectly Bore: Bore on the 2.5” barrel is in good condition with lots of rifling. Stock: Genuine ivory grips are in good condition. A small chip on the bottom of left panel Price includes shipping. Will come with an RCMP FRT report with this guns serial number outlining status.

categories:GunsSporting Goods

13473 impressions

629 views

This old Mauser 71/84 which is more commonly known as the Mauser 43 (11.15 x 60mmR) is an all original beauty. All numbers matching even down to the smallest screw. Only thing missing is the forward sling swivel. What a great old gun to shoot. Imagine the challenge of taking a deer with this thing. I will include 10 original BP rounds with this gun as well. A good added value IYKYK.

categories:GunsSporting Goods

5118 impressions

331 views