Alberta Buy and Sell / Over Under

Browse the latest buy and sell ads across Alberta
Photo of Can You Avoid a DUI Conviction in Alberta? Top Legal Tactics Revealed | Kolinsky Law
$10
Can You Avoid a DUI Conviction in Alberta? Top Legal Tactics Revealed | Kolinsky Law
Facing a DUI Charge in Edmonton can be overwhelming, with serious consequences like license suspension, hefty fines, and even jail time. But here’s the good news—a skilled DUI Lawyer in Edmonton can help you fight the charges and protect your future. At Kolinsky Law, our experienced Impaired Driving Lawyers in Edmonton have successfully defended countless clients using proven legal strategies. In this guide, we’ll break down the top defence strategies for beating a DUI charge in Alberta, so you know what to expect—and when to take action. Why You Need a DUI Lawyer in Edmonton A DUI conviction in Alberta can impact your job, driving privileges, and even your ability to travel. Before you accept a guilty plea, consider these key defence strategies that could help you avoid a conviction or reduce penalties. 1. Challenging the Traffic Stop Police must have reasonable suspicion to pull you over. If they lacked a valid reason (e.g., no erratic driving or traffic violation), your DUI Lawyer in Edmonton could argue that the stop was unlawful, potentially getting the case dismissed. 2. Questioning Breathalyser & Blood Test Accuracy Breathalyser devices must be properly calibrated and administered. Common defences include: • Improper calibration or maintenance of the device • No proper observation period before testing • Medical conditions (e.g., acid reflux, diabetes) affecting results If the testing was flawed, your Impaired Driving Lawyer in Edmonton could challenge the evidence. 3. Proving Charter Rights Violations Under the Canadian Charter of Rights and Freedoms, you have the right to: • Legal counsel upon arrest • Protection against unlawful detention • Timely disclosure of evidence If police failed to inform you of these rights, your DUI Charge in Edmonton could be thrown out. 4. Raising Doubts About "Care and Control" Even if you weren’t driving, you could be charged if police believe you had "care and control" of the vehicle. However, a strong defence could argue: • You had no intention to drive (e.g., sleeping in the car) • You were not in the driver’s seat • The keys were not accessible 5. Negotiating a Plea Bargain or Reduced Charge If the evidence is strong, your DUI Lawyer in Edmonton may negotiate for a lesser charge (e.g., careless driving) to avoid a criminal record. What Are the Penalties for a DUI in Alberta? A DUI conviction can lead to: • License suspension (1 year for first offence) • Fines ($1,000+) • Mandatory ignition interlock program • Possible jail time (for repeat offences) For a full breakdown, read our guide: Understanding DUI Penalties in Alberta: What You Need to Know Can You Get Your License Back After a DUI in Alberta? Yes, but the process can be complex. Learn more here: How Do DUI Charges Affect a License in Alberta? Will a DUI Affect Your Job? Many employers conduct criminal record checks. Find out your rights here: Can You Lose Your Job Over a DUI in Alberta? Why Choose Kolinsky Law as Your DUI Defence Team? • Former prosecutors who know how the system works • Decades of combined experience in DUI cases • Proven track record of winning cases and reducing penalties • Personalised defence strategies tailored to your case Act Now—Before It’s Too Late! The sooner you hire a Best DUI Lawyer in Edmonton, the better your chances of beating the charge. Don’t Let a DUI Ruin Your Life—Fight Back Today! 🚗 Driving privileges at stake? We can help. ⚖️ Facing criminal charges? Get expert defence. 📞 Call Kolinsky Law NOW—your future depends on it! Contact Us Today for a Case Review
categories:Business and Services
1585 impressions
277 views
Edmonton, AB8 months ago
Photo of Two Tarpan geldings for sale
Photo of Two Tarpan geldings for sale
Photo of Two Tarpan geldings for sale
Photo of Two Tarpan geldings for sale
Photo of Two Tarpan geldings for sale
Photo of Two Tarpan geldings for sale
Two Tarpan geldings for sale
Jehu is a 11 year old Tarpan gelding (first 3 pictures). He was my first horse, I’ve had him since he was a yearling. I bought him totally un-broke, but a friendly and curious little guy. Over the following years I put many many miles of ground work on him. He had about 2 weeks of professional training under saddle, and again a couple months later. After that I continued with his training, now with riding included. I did more ground work than under saddle, as I hadn’t had much experience riding. I did a lot of work with obstacle training, desensitizing, equipment, leading and riding around the farm yard etc. With constant handling, he was overall quite calm, but with longer periods of no handling he was more startled by ‘scary’ objects. I never personally cantered him while riding, but he did in his professional training with another rider. I’ve focused more on many miles of trotting, and practicing his circles and leg cues. I have not worked with him in over a year, but am hoping to ‘bring him up to date’ again if I’m able to this fall. He remembers well. Even last summer after a long break I did a short little warm-up, hopped on bareback and rode around a bit - he did great. He finally seems to be settling into more of an ‘older horse’ laid-backness. But he can be stubborn and headstrong sometimes (typical Tarpan). Needs an experienced hand. But he is really sweet, and wants to please. He can be hard to catch at times when he sees the halter. Again, consistency seems to help. He is great for the farrier. He is just under 14hh approximately, but I haven’t correctly measured him before. But don’t let his height fool you - I am almost 5.10, and he can carry me no problem. He’s a very strong boy. In the times I was working with him, he stood well for saddling/unsaddling. He hand-lunges great, took his cues very well, and was quite soft. Leg pressure cue to turn was getting better. I had done some lying down training with him many years ago, more for fun. He did pretty good, but I didn’t continue with it lol. I’m ready to sell him anytime, for anyone willing and wanting to pick up on his training again. He learns fast, and wants to do things. He’s such a great pony, I want to see him being used again. I will not sell him to just anyone, he must go to a good home where he will be used and cared for. It would be really great if he could be sold together with Smokey, our other Tarpan - they are the best of friends. Asking $4,900 for him. The re-created Tarpans are a rare breed of horse, and have great potential. There are less than 1,000 in the world. Really sweet and beautiful ponies. SMOKEY: last 3 pictures. Smokey is a 10 year old Tarpan gelding. He stands about 14.h.h, more less. He has had some groundwork, saddling, and a little bit of riding, but has not been trained under saddle for some years. He is easy to catch, and is good for the farrier. He needs an experienced hand, as he can be stubborn and in your space if you are not confident. He is overall quite calm, and doesn’t come across as a ‘get up and go’ pony, so with good and consistent training I can see him becoming a great pony for children. If interested in either of these boys, please text for leave a voice message. Thank you.
categories:Pets and AnimalsHorses
7344 impressions
1121 views
Grande Prairie, AB1 year ago
Photo of ACREAGE FOR SALE BY TENDER
Photo of ACREAGE FOR SALE BY TENDER
Photo of ACREAGE FOR SALE BY TENDER
Photo of ACREAGE FOR SALE BY TENDER
Photo of ACREAGE FOR SALE BY TENDER
Photo of ACREAGE FOR SALE BY TENDER
Photo of ACREAGE FOR SALE BY TENDER
Photo of ACREAGE FOR SALE BY TENDER
Photo of ACREAGE FOR SALE BY TENDER
$1
ACREAGE FOR SALE BY TENDER
OFFERED FOR SALE BY TENDER Dreaming of acreage living; this property is like no other. Located on paved roads, just over two hours from Calgary, one and three quarter hours from Edmonton and forty-five minutes from Red Deer with spectacular unencumbered views of Gull Lake and the foothills. Surrounded by nature, the area is full of deer, moose, birds and more for your enjoyment. Use this property as your year round weekend retreat or full time residence. The house is a 1920’s Arts & Crafts style bungalow moved from Lower Mount Royal in Calgary Alberta to 2.18 acres 10 minutes north of Gull Lake Alberta with a new custom designed detached 2 storey triple garage. The home offers 1978 sq. feet of above grade developed space. The loft area of the garage is an additional fully developed space of 707 sq. feet. The lot is landscaped with mature spruce, birch, mountain ash, apple, Saskatoon (both tame & wild), lilacs and many varieties of natural shrubs & trees. The flower beds have been populated with perennials. The cleared area is seeded to Parkland grass. Offered under separate title is the adjacent 2.21 acre unserviced lot with two sheds. There is a cultivated garden spot. Power, gas & fiber optic internet are available at the property line. The design of the house had been maintained but it has been completely upgraded. The 1066 sq. ft. main floor of the home has maintained the original footprint with the addition of a new concrete walkout basement & small side enclosed porch with breakfast eating area. There is a three season enclosed front porch area available for your enjoyment. The kitchen renovation included new cabinets, Corian counter tops & maple engineered flooring. All of the main floor plumbing has been upgraded. The master bathroom has been enlarged & decorated with period style fixtures. The fir flooring in the hallway & bedroom as well as the maple floors in the dining room, living room & front hall way have been refinished. We have tried to maintain the original wood trim & doors. New vinyl single hung dual pane windows were added to the main floor in 2022. The 910 sq. ft. lower level above grade development contains 2 large bedrooms, one with a walk in closet, 4 piece bathroom, family room & laundry-mechanical room. There is carpet in the bedrooms & engineered maple flooring in the family room, hallway, & stairs to the upper level. Vinyl tile in the bathroom & laundry room. Exterior walls are 2 x 6 with R20 insulation. Plenty of natural light is provided by the large windows. A natural gas hook up is provided for your BBQ on the outdoor patio. As part of the restoration process, insulation was blown in to the exterior walls from the inside on the main level so that the original cedar shingle siding could be preserved. Additional insulation was blown into the attic at the same time. Radiant Heat in the basement floor & hot water is provided by a natural gas boiler system. This system also provides radiant heat in the garage & loft area. The main floor & lower level of the home are heated with a forced air furnace. This package includes the electric stove, fridge, dish washer, washer, dryer, freezer and central vacuum system. There is an option to purchase the existing furnishings in both the house and the loft. The oversized triple garage has three bays with 10 ft. ceiling as well as a developed loft area with views of Gull Lake, foothills & the lower valleys. It is situated on a 4 ft. foam block pony wall with radiant heat in the garage floor & loft area. The walls are 2 x 6 construction with R20 insulation. The entire garage area is dry walled. The loft area above the garage is fully developed with a 3 piece bathroom. There are 2 balconies, one on the south side & one on the north side. The floors are luxury vinyl tile & bamboo engineered flooring. All of the windows are vinyl double pane single hung. There is plenty of natural light from all directions. The well is approximately 203 ft. deep, perforated from 170 ft. to 203 ft. with the pump set at 175 ft. The well flow is rated at 40 gpm. There is a 750 gallon septic tank with a gravity fed field. Fiber optic internet is available at the front of the property. Satellite TV is available for your entertainment. Natural gas service provided by Gull Lake Creek Gas Co-op. For more information, photos, floor plans, and bid application you may contact the Owners at mytender2024@gmail.com. Private viewings available by appointment only.
categories:Real Estate and Rentals
13349 impressions
1601 views
Calgary, AB1 year ago
Photo of Brand new MAGPUL 1913 Pictinny Rail Bipod-FDE $180
$180
Brand new MAGPUL 1913 Pictinny Rail Bipod-FDE $180
Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA
categories:Sporting GoodsGuns
3069 impressions
511 views
Calgary, AB2 months ago
Photo of Brand new TRIJICON ACCUPOINT TR23-1G 5-20X50 STD Crosshair W/ Green Dot Scope $1500
Photo of Brand new TRIJICON ACCUPOINT TR23-1G 5-20X50 STD Crosshair W/ Green Dot Scope $1500
$1500
Brand new TRIJICON ACCUPOINT TR23-1G 5-20X50 STD Crosshair W/ Green Dot Scope $1500
Brand new 5-20x50mm 30mm Tube Second Focal Plane Trijicon produces battle-proven aiming systems that deliver rapid target acquisition and increased hit potential under any lighting conditions. Their self-luminous aiming systems empower you to execute any shot with complete confidence in bright light, low light or no light at all. With a stunning magnification range, a 30mm tube, and an impressive objective, the AccuPoint 5-20x50 looks mighty serious while delivering the power needed to get on target across long distances. This fine optic is also graced with a very handy third turret that re-focuses the reticle to eliminate parallax error. Sighting during twilight conditions is enhanced considerably by the remarkable 50mm objective, while the dual tritium/fiber optic reticle illumination system provides a vibrant aiming point under any conditions. A mounting base and rings are used to attach a riflescope to a firearm. A comfortable sight picture is contingent upon the height of the rings. A comfortable cheek-weld is the result of properly positioning the scope over the receiver. Mounting the scope close to the receiver is preferable, yet scopes with larger objectives need higher rings so the front bell can clear the barrel. It should be noted that in many mounting applications, a professional gunsmith's skills will be needed for proper installation. 30mm Main-Tube 6061-T6 Aluminum main-tube is waterproof to 10' Mil-Spec Finish Type III hard anodized per MIL-A-8625 , Class 2 dull & non reflective Multi-Layer Coated Lenses Provide superior clarity, zero distortion, flare/glare reduction Side-Focus Parallax Correction Third turret on saddle actuates parallax correction for long-range accuracy Fiber Optics and Tritium Illumination Proprietary battery-free technology provides a vivid aiming point without the need for failure-prone batteries Dual-Illuminated Standard Crosshair w/Green Dot Reticle A series of dots upon the cross hairs gives the shooter the ability to judge bullet drop and the proper hold over for accurate long range shot placement. Trijicon's proprietary tritium/fiber-optic illumination technology places a brilliant green dot at the intersection of the stadia. This scope has the reticle positioned in the rear or second focal plane so it will not magnify when the scope is zoomed to high power. This leaves the sight picture unobstructed for a clear view at all times. Reticle: Standard Crosshair w/Green Dot Main-Tube Diameter: 30mm Linear Field of View: 5x: 19.1' @ 100 yd / 6.3 m @ 100 m 20x: 5.1' @ 100 yd / 1.7 m @ 100 mExit Pupil Diameter5x: 10mm 20x: 2.5mmEye Relief5x: 3.8" / 96.5mm 20x: 4.1" / 104 mm Impact Point Correction: 1/4 MOA Maximum Windage/Elevation Adjustment Windage: 34 MOA Elevation: 34 MOA Weatherproofing: Waterproof to 10.0' Length: 13.6"/345mm w/o sunshade Weight: 29.4 oz / 0.83 kg w/ sunshade Coming with: Weatherproof Logo Sticker 3.0" Sunshade Pair of Lens Caps Limited Lifetime Warranty (15 Year Warranty on Tritium)
categories:Sporting GoodsGuns
8929 impressions
637 views
Calgary, AB2 weeks ago
Photo of Brand new MAGPUL 1913 Pictinny Rail Bipod-FDE $170
$170
Brand new MAGPUL 1913 Pictinny Rail Bipod-FDE $170
Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA
categories:Sporting GoodsGuns
2846 impressions
419 views
Calgary, AB1 year ago
Photo of Brand new MAGPUL 1913 Pictinny Rail Bipod $180
$180
Brand new MAGPUL 1913 Pictinny Rail Bipod $180
Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA
categories:Sporting GoodsGuns
2876 impressions
502 views
Calgary, AB1 year ago
Photo of Brand new MAGPUL M-LOK Bipod $180
$180
Brand new MAGPUL M-LOK Bipod $180
Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA
categories:Guns
4288 impressions
494 views
Calgary, AB1 year ago
Photo of Discover Your Perfect Hypoallergenic Companion at Maltese of Paradise!
Photo of Discover Your Perfect Hypoallergenic Companion at Maltese of Paradise!
Photo of Discover Your Perfect Hypoallergenic Companion at Maltese of Paradise!
Photo of Discover Your Perfect Hypoallergenic Companion at Maltese of Paradise!
Photo of Discover Your Perfect Hypoallergenic Companion at Maltese of Paradise!
Photo of Discover Your Perfect Hypoallergenic Companion at Maltese of Paradise!
Photo of Discover Your Perfect Hypoallergenic Companion at Maltese of Paradise!
$2750
Discover Your Perfect Hypoallergenic Companion at Maltese of Paradise!
Are you looking for a hypoallergenic furry friend to bring endless love and joy to your family? Maltese of Paradise is here to make your dreams come true! With five generations of dedication to purebred and hybrid breeds, we offer puppies raised in a loving, home-based environment, ensuring they grow into well-socialized, happy, and healthy pets. Our adorable pups are the perfect blend of charm and hypoallergenic qualities, ideal for families with allergy concerns or those looking for minimal shedding. Under our careful supervision, they receive all necessary vaccinations, thorough health check-ups, and ample socialization. Upcoming Litters Alert! Our waitlist is now open for upcoming litters of Maltese, Maltipoos, Miniature Goldendoodles, Morkies, and Poodles. Perfect for allergy sufferers, our puppies come with thorough health screenings, vaccinations, deworming, and microchipping right from the start. Why Choose Maltese of Paradise? Ongoing Support: We don't just hand over a pet; we provide continuous advice and assistance for all your puppy care and training queries. Reserve Your Puppy: Secure your chosen puppy with a 25% deposit. We prioritize flexibility and convenience, offering customizable payment plans and accepting cash, e-transfer, or PayPal. Don't let this opportunity pass by! Secure Your Puppy! and welcome a loving, hypoallergenic companion into your home. Embrace the joy and companionship of a Maltese of Paradise puppy – your adventure starts here!
categories:Dogs
29770 impressions
3060 views
Edmonton, AB1 year ago
Showing 16 of 58 records